|
|
|
|
|
|
|
|
Petrol Tank |
|
Making a petrol tank from 1.2mm |
|
|
|
|
|
|
|
|
|
|
Petrol Tank |
|
Using a piece of 3mm on the inside and a mallet on the outside |
|
|
|
|
|
|
|
|
|
|
Petrol Tank |
|
Same sort of thing |
|
|
|
|
|
|
|
|
|
|
|
|
Petrol Tank |
|
Tack welded and positioned |
|
|
|
|
|
|
|
|
|
|
|
|
Steering Column |
|
Testing position |
|
|
|
|
|
|
|
|
|
|
|
Petrol tank |
|
Nice snug fit |
|
|
|
|
|
|
|
|
|
|
|
Petrol Tank |
|
Welded one of the ends in |
|
|
|
|
|
|
|
|
|
|
Engine mounts |
|
New and improved |
|
|
|
|
|
|
|
|
|
|
Engine Mounts |
|
These mounts were measured up and cut, then welded together out of the chassis |
|
|
|
|
|
|
|
|
|
|
|
Engine Mounts |
|
Much stronger, I think the problem before was a lack of space when welding |
|
|
|
|
|
|
|
|
|
|
Engine Mounts |
|
Welded in position |
|
|
|
|
|
|
|
|
|
|
Close up |
|
of an engine mount |
|
|
|
|
|
|
|
