|
|
|
|
|
|
|
|
Handbrake |
|
Welded in position |
|
|
|
|
|
|
|
|
|
|
|
Handbrake |
|
Had to add another piece to stop the threaded bar from bending ... |
|
|
|
|
|
|
|
|
|
|
|
Threaded bar |
|
... the M6 Threaded bar may be replaced with M8 |
|
|
|
|
|
|
|
|
|
|
|
Rear Wheel Arch |
|
We didn't get much done this week ... |
|
|
|
|
|
|
|
|
|
|
|
Arch |
|
... these 2 wheel arch mounts/fillets are all we did |
|
|
|
|
|
|
|
|
|
|
|
Brake Pipe Brackets |
|
The brake pipe brackets were cut from 3mm plate and drilled |
|
|
|
|
|
|
|
|
|
|
|
Brake Pipe Brackets |
|
This is one of the front ones |
|
|
|
|
|
|
|
|
|
|
Stripped |
|
All parts have been stripped off, ready to be 'derusted' and painted |
|
|
|
|
|
|
|
|
|
|
Paint Stripping |
|
We both took it in turns to remove the paint from the chassis using 'The Tool', 3 hours and still lots to do |
|
|
|
|
|
|
|
|
|
|
|
Tiring work |
|
It's 28°C but it must be done
|
|
|
|
|
|
|
|
|
|
|
Clean Gearbox |
|
Cleaned the gearbox and is now ready for painting |
|
|
|
|
|
|
|
|
|
|
New Propshaft |
|
Cost a bit, but I'm sure it's all worth it in the end |
|
|
|
|
|
|
|
